Home » Super Duplex Steel S32750 Hex Nut
UNS S32750, 1.4410, ASTM A479 Super Duplex Steel S32750 Hex Nut
UNS S32750, 1.4410, ASTM A479 Super Duplex Steel S32750 Heavy Hex Nut
UNS S32750, 1.4410, ASTM A479 S32750 SDSS Hex Nut
UNS S32750, 1.4410, ASTM A479 Super Duplex Steel S32750 Heavy Hex Nut
Table of Content
How to measure S32750 Super Duplex Steel hex nut sizes?
Measuring the S32750 Super Duplex Steel hex nut sizes can be done using a micrometer or a caliper. To measure with a micrometer, place the nut in the jaws of the micrometer, making sure it is centered, and then tighten the jaws until they make contact with the nut. Read the measurement from the micrometer’s scale. To measure with a caliper, place the nut between the jaws of the caliper and tighten the jaws until they make contact with the nut. Read the measurement from the caliper’s scale. When measuring the size of S32750 Super Duplex Steel hex nuts, it is important to use an accurate and consistent measuring tool to ensure that the correct size is selected for the application.
What are the uses of SDSS din 934 hex nuts?
SDSS DIN 934 hex nuts are commonly used in various industrial applications where high corrosion resistance and mechanical strength are required. These nuts are made from SDSS (Super Duplex Stainless Steel), which is known for its excellent corrosion resistance, pitting, and stress corrosion cracking in a wide range of harsh environments. Due to their high corrosion resistance and strong mechanical properties, SDSS din 934 hex nuts are often used in the petrochemical, oil and gas, marine, and chemical processing industries. In addition, these nuts are also commonly used in piping systems, machinery and equipment, and other applications where the fastening of bolts is required.
UNS | Super Duplex Industry Specifications | Chemical Composition | Min.Tensile (KSI) | Min.Yield (KSI) | Elongation % |
UNS S32750 | ASTM A182 F53, A240, A276, A479, A789, A790, A815, A928, A988 | C 0.030 max Cr 24.0-26.0 Cu 0.5 max Mn 1.20 max Mo 3.0-5.0 N 0.24-0.32 Ni 6.0-8.0 P 0.035 max S 0.020 max Si 0.8 max | 116 | 80 | 50 |
UNS S32760 | ASTM A182 F55, A240, A276, A314, A473, A479, A789, A790, A815, A928, A988 | C 0.03 max Cr 24.0-26.0 Cu 0.5-1.0 Mn 1.0 max Mo 3.0-4.0 N 0.2-0.3 Ni 6.0-8.0 P 0.03 max S 0.01 max Si 1.0 max W 0.5-1.0 | 109 | 80 | 25 |
Standard | IS, ANSI, ASTM DIN, ISO, JIS, GB, ASME, BS, UNI and all International Standards |
Threads | BSF, UNF METRIC, UNC, BSW or as required |
American Standards | ANSI – American National Standards Institute Stud Bolt length are defined in ASME B16.5 standard ASME B18.5 UNS S32750 Bolts ANSI B 28.2.4 1M ANSI B 18.2.4 2M DIN 931 UNS S32750 Hex Bolts DIN 933 UNS S32750 Screws DIN 938, DIN 939, DIN 940, DIN 835 UNS S32750 Stud bolts DIN 125 / ISO 7089, 7090 UNS S32750 Flat Washer Hex nuts are defined in ASME B18.2.2 DIN: DIN 970, DIN 933, DIN 931, DIN 934 UTS – Unified Thread Standard : UNC, UNF, NPTF, NPT, UNS, UNEF ISO – International Organization for Standardization ISO 4033, : ISO 4032, JIS standards write american standard in one td and other content in second td |
UNS S32750 Bolts Size range | M10, M4, M16, M36 M2.5, M6, M30, M12, M8, M14, M2, M3, M20, M24, M5 to M160 |
Length | 3 mm to 200 mm |
Head Drive | Phillips, Slotted, Phillips/Slot, Six-Lobe etc |
Test Certificate | as per EN 10204 / 3.1 Manufacturer Test Certificate |
Finishing | Zinc white, (yellow, black, blue), black oxide, Dacroment, Geometry, plated zinc-nickel, anodizing, nickel plated, Stainless steel: Passivated Self-Colour, Bright Zinc Plated (BZP), Hot Dip Galvanised (HDG), Sherardized, Stainless Steel, some special one like DACROMET and Mechanically Applied coating |
Duplex Round Bar Source to produce UNS S32750 Bolts | JSPL, Mukund Steel, Usha Martin, Tata Steel, RINL, Dhamm Steel etc. |
Form | Square, Hex, Threading as per Gauge, Round Etc. |
Manufacturing Process |
|
Surface Coating |
|
Packing | IN BULK: Small Boxes / pallet, canton, carton / pallet or as per client request |
Specification : ASTM A479 / ASME SA479
Size :
Hex Nuts Size Metric : Dia: M10 – M110 / Length: 12 – 1200MM
Hex Nuts Size Inch : Dia: 1/2″ – 4.0″ / Length: 1/2″ – 52″
Length : 3 to 200 mm
Standard : ISO, IS, ANSI, ASME, UNI, ASTM, DIN, JIS, IS, GB, BS, CSN, EU, IFI, PN, and all International Standards
DIN Standard : DIN 934, DIN 982, DIN 985, DIN 936, DIN 929, DIN 1587, DIN 439, DIN 315
Hex Nuts Grades : A194 8M, A194 Grade 6, A194 7m, A194 Grade 8 Hex Nuts, A194 Grade 2HM, A194 Grade 4, A194 Grade , A194 Grade 7m, A194 Grade 2H Hex Nuts
UTS : NPT, UNS, UNF, UNC, UNEF, NPTF
ISO : ISO 4014, ISO 4017, ISO 4032, ISO 4162, ISO 4161
Threads : METRIC, BSW, UNC, UNF, BSF or as required
Hex Nuts Coating : PTFE Coated Hex Nuts, Nickel Plated Hex Nuts, Hot Dip Galvanized Hex Nuts, Hex Nuts, Yellow Zinc Plated Hex Nuts, Zinc Cobalt Plated Hex Nuts, Black Phosphate Hex Nuts, Blue Zinc Plated Hex Nuts, Aluminium Zinc Flake Coated Hex Nuts, Black Zinc Plated, Zinc Plated Hex Nuts
Hex Nuts Forming : Hot Forged Hex Nuts & Cold Forged Hex Nuts
UTS – Unified Thread Standard : UNC, UNF, NPT, UNS, UNEF, NPTF
ASME Standard : ASME B18.2.2 / ASME B18.16.6 /ASME B18.16.4 / ASME B18.2.2
STANDARD | ASTM | ASME | UNS | WERKSTOFF NR. |
Super Duplex 2507 | A276/ A479 | SA 276/ SA 479 | S32750 | 1.4410 |
WE MANUFACTURE Super Duplex Steel S32750 Hex Nuts AS PER INTERNATIONAL STANDARDS & SPECIFICATIONS. S32750 SDSS Hex Nut MANUFACTURERS IN INDIA, CUSTOM SIZES SDSS S32750 Hex Jam Nuts, Panel Hex Nuts, Weld Hex Nut CAN BE PRODUCED AS PER CLIENT DRAWING.
Basic Major Thread Diameter Nominal Size | Width Across Flats (F) | Width Across Corners (C) | Heavy Hex Nut Thickness (H) | ||||||
---|---|---|---|---|---|---|---|---|---|
Basic | Max | Min | Max | Min | Basic | Max | Min | ||
1/4 | .2500 | 7/16 | .438 | .428 | .505 | .488 | 7/32 | .226 | .212 |
5/16 | .3125 | 1/2 | .500 | .489 | .577 | .557 | 17/64 | .273 | .258 |
3/8 | .3750 | 9/16 | .562 | .551 | .650 | .628 | 21/64 | .337 | .479 |
7/16 | .4375 | 11/16 | .688 | .675 | .794 | .768 | 3/8 | .385 | .365 |
1/2 | .5000 | 3/4 | .750 | .736 | .866 | .840 | 7/16 | .448 | .427 |
9/16 | .5625 | 7/8 | .875 | .861 | 1.010 | .982 | 31/64 | .496 | .473 |
5/8 | .6250 | 15/16 | .938 | .922 | 1.083 | 1.051 | 35/64 | .559 | .535 |
3/4 | .7500 | 1-1/8 | 1.125 | 1.088 | 1.299 | 1.240 | 41/64 | .665 | .617 |
7/8 | .8750 | 1-5/16 | 1.312 | 1.269 | 1.516 | 1.447 | 3/4 | .776 | .724 |
1 | 1.0000 | 1-1/2 | 1.500 | 1.450 | 1.732 | 1.653 | 55/64 | .887 | .831 |
1-1/8 | 1.1250 | 1-11/16 | 1.688 | 1.631 | 1.949 | 1.859 | 31/32 | .999 | .939 |
1-3/8 | 1.3750 | 2-1/16 | 2.062 | 1.994 | 2.382 | 2.273 | 1-11/64 | 1.206 | 1.138 |
1-1/2 | 1.500 | 2-1/4 | 2.250 | 2.175 | 2.598 | 2.480 | 1-9/32 | 1.ASTM A194 GR. 8 | 1.245 |
1-5/8 | 1.6250 | 2-7/16 | 2.438 | 2.356 | 2.815 | 2.686 | 1-25/64 | 1.429 | 1.353 |
1-3/4 | 1.7500 | 2-5/8 | 2.625 | 2.538 | 3.031 | 2.893 | 1-1/2 | 1.540 | 1.460 |
2 | 2.0000 | 3 | 3.000 | 2.900 | 3.464 | 3.306 | 1-23/32 | 1.763 | 1.675 |
2-1/4 | 2.2500 | 3-3/8 | 3.375 | 3.263 | 3.897 | 3.719 | 1-15/16 | 1.986 | 1.890 |
2-1/2 | 2.5000 | 3-3/4 | 3.750 | 3.625 | 4.330 | 4.133 | 2-5/32 | 2.209 | 2.105 |
2-3/4 | 2.7500 | 4-1/8 | 4.125 | 3.988 | 4.763 | 4.546 | 2-3/8 | 2.431 | 2.319 |
DIA | M4 | M5 | M6 | M8 | M10 | M12 | M14 | M16 | M18 | M20 | M22 | M24 | M27 | M30 | M33 | M36 | M39 | M42 | M45 | M48 | M52 |
Pitch | 0.7 | 0.8 | 1 | 1.25 | 1.5 | 1.75 | 2 | 2 | 2.5 | 2.5 | 2.5 | 3 | 3 | 3.5 | 3.5 | 4 | 4 | 4.5 | 4.5 | 5 | 5 |
Across Flat (S) Max Min | 7 | 8 | 10 | 13 | 16 | 18 | 21 | 24 | 27 | 30 | 34 | 36 | 41 | 46 | 50 | 55 | 60 | 65 | 70 | 75 | 80 |
6.78 | 7.78 | 9.78 | 12.73 | 15.73 | 17.73 | 20.67 | 23.67 | 26.16 | 29.16 | 33 | 35 | 40 | 45 | 49 | 53.8 | 58.8 | 63.1 | 68.1 | 73.1 | 78.1 | |
Thickness (M) MaxMin | 3.2 | 4.7 | 5.2 | 6.8 | 8.4 | 10.8 | 12.8 | 14.8 | 15.8 | 18 | 19.4 | 21.5 | 23.8 | 25.6 | 28.7 | 31 | 33.4 | 34 | 36 | 38 | 42 |
2.9 | 4.4 | 4.9 | 6.44 | 8.04 | 10.37 | 12.1 | 14.1 | 15.1 | 16.9 | 18.1 | 20.2 | 22.5 | 24.3 | 27.4 | 29.4 | 31.8 | 32.4 | 34.4 | 36.4 | 40.4 | |
Across corners (E) Min | 7.66 | 8.79 | 11.05 | 14.38 | 17.77 | 20.03 | 23.35 | 26.75 | 29.56 | 32.95 | 37.29 | 39.55 | 45.2 | 50.85 | 55.37 | 60.79 | 66.44 | 71.3 | 76.95 | 82.6 | 88.25 |
Minor Dia at thread (min) | 3.242 | 4.134 | 4.917 | 6.647 | 8.376 | 10.106 | 11.835 | 13.835 | 15.294 | 17.294 | 19.294 | 20.752 | 23.752 | 26.211 | 29.211 | 31.67 | 34.67 | 37.129 | 40.129 | 42.587 | 46.587 |
Minor Dia at thread (max) | 3.422 | 4.334 | 5.153 | 6.912 | 8.676 | 10.441 | 12.210 | 14.210 | 15.744 | 17.774 | 19.774 | 21.252 | 24.252 | 26.771 | 29.771 | 32.27 | 35.27 | 37.799 | 40.799 | 43.297 | 47.297 |
**All measurements in millimeters**
DIA | M16 | M20 | M22 | M24 | M27 | M30 | M36 |
Pitch | 2 | 2.5 | 2.5 | 3 | 3 | 3.5 | 4 |
Head Across Flat (B) Min | 26.16 | 33 | 35 | 40 | 45 | 49 | 58.8 |
Head Across Flat (B) Max | 27 | 34 | 36 | 41 | 46 | 50 | 60 |
Height (H) Min Max | 16.4 | 19.4 | 22.3 | 22.9 | 26.3 | 29.1 | 35 |
17.1 | 20.7 | 23.6 | 24.2 | 27.6 | 30.7 | 36.6 | |
Across corners C min | 29.56 | 37.29 | 39.55 | 45.20 | 50.85 | 55.37 | 66.44 |
Minor Dia at thread (min) | 14.235 | 17.694 | 19.694 | 21.202 | 24.252 | 26.761 | 32.270 |
Minor Dia at thread (max) | 14.610 | 18.144 | 20.144 | 21.702 | 24.752 | 27.321 | 32.870 |
NOMINAL SIZE (D) | BODY DIAMETER | BOLT HEAD THICKNESS | ACROSS THE FLATS | ACROSS CORNERS | ||||
---|---|---|---|---|---|---|---|---|
D (MAX) | D (MIN) | H (MAX) | H (MIN) | F (MAX) | F (MIN) | C (MAX) | C (MIN) | |
m10 | 10.00 | 9.78 | 6.63 | 6.17 | 17.00 | 15.73 | 18.48 | 17.77 |
m12 | 12.00 | 11.73 | 7.76 | 4.24 | 19.00 | 17.73 | 20.78 | 20.03 |
m14 | 14.00 | 13.73 | 9.09 | 8.51 | 22.00 | 20.67 | 24.25 | 23.35 |
m16 | 16.00 | 15.73 | 10.32 | 9.68 | 24.00 | 23.67 | 27.71 | 26.75 |
m20 | 20.00 | 19.67 | 12.88 | 12.12 | 30.00 | 29.16 | 34.64 | 32.95 |
m24 | 24.00 | 23.67 | 15.44 | 14.56 | 36.00 | 35.00 | 41.57 | 39.55 |
m30 | 30.00 | 29.67 | 19.48 | 17.92 | 46.00 | 45.00 | 53.12 | 50.85 |
m36 | 36.00 | 35.61 | 23.38 | 21.63 | 55.00 | 53.80 | 63.51 | 60.79 |
m42 | 42.00 | 41.38 | 26.97 | 25.03 | 65.00 | 62.90 | 75.06 | 71.71 |
m48 | 48.00 | 47.38 | 31.07 | 28.93 | 75.00 | 72.60 | 86.60 | 82.76 |
m56 | 56.00 | 55.26 | 36.2 | 33.80 | 85.00 | 82.20 | 98.15 | 93.71 |
m64 | 64.00 | 63.26 | 41.32 | 38.68 | 95.00 | 91.80 | 109.70 | 104.65 |
m72 | 72.00 | 71.26 | 46.45 | 43.55 | 105.00 | 101.40 | 121.24 | 115.60 |
m80 | 80.00 | 79.26 | 51.58 | 48.42 | 115.00 | 111.00 | 132.72 | 126.54 |
m90 | 90.00 | 89.13 | 57.74 | 54.26 | 130.00 | 125.50 | 150.11 | 143.07 |
m100 | 90.00 | 99.13 | 63.9 | 60.10 | 145.00 | 140.00 | 167.43 | 159.60 |
UNC Nut N/B | Max Across Corners | Min Across Corners | Max Thickness | Min Thickness | Max Across Flats | Max Across Flats |
---|---|---|---|---|---|---|
1 | 47.7 | 45.6 | 25.7 | 24.3 | 41.3 | 40 |
1 1/2 | 69.6 | 66.6 | 38.2 | 36.4 | 60.3 | 58.4 |
1 1/4 | 58.6 | 56.1 | 31.8 | 30.1 | 50.8 | 49.2 |
1 1/8 | 53.2 | 50.8 | 28.9 | 27.4 | 46 | 44.6 |
1 3/4 | 80.6 | 77.1 | 44.7 | 42.6 | 69.9 | 67.6 |
1 3/8 | 64.2 | 61.4 | 35 | 33.3 | 55.6 | 53.8 |
1 5/8 | 75.2 | 71.8 | 41.5 | 39.5 | 65.1 | 63 |
1 7/8 | 86.2 | 82.3 | 47.9 | 45.8 | 74.6 | 72.2 |
1/2 | 25.6 | 24.6 | 12.8 | 11.8 | 22.2 | 21.6 |
2 | 91.6 | 87.6 | 51.1 | 48.9 | 79.4 | 76.8 |
2 1/2 | 113.6 | 108.6 | 63.6 | 61 | 98.4 | 95.2 |
2 1/4 | 102.6 | 98.1 | 57.2 | 54.7 | 88.9 | 86.1 |
2 3/4 | 124.6 | 119.1 | 70.1 | 67.2 | 108 | 104.4 |
3 | 135.6 | 129.6 | 76.5 | 73.5 | 117.5 | 113.7 |
3/4 | 36.7 | 35.1 | 19.3 | 18 | 31.8 | 30.8 |
3/8 | 20.2 | 19.4 | 9.6 | 8.7 | 17.5 | 17 |
5/8 | 31.2 | 29.8 | 16 | 14.9 | 27 | 26.2 |
7/16 | 22 | 21.1 | 11.2 | 10.2 | 19 | 18.5 |
7/8 | 42.2 | 40.4 | 22.5 | 21.2 | 36.5 | 35.4 |
9/16 | 27.5 | 26.3 | 14.4 | 13.4 | 23.8 | 23.1 |
ISO Nut NB | Across Corners | MAX Thickness | MIN Thickness | MAX Across Flats | MIN Across Flats |
---|---|---|---|---|---|
M 8 | 14.38 | 6.8 | 6.44 | 13 | 12.73 |
M 10 | 17.77 | 8.4 | 8.04 | 16 | 15.73 |
M 12 | 20.03 | 10.8 | 10.37 | 18 | 17.73 |
M 14 | 23.35 | 12.8 | 12.1 | 21 | 20.67 |
M 16 | 26.75 | 14.8 | 14.1 | 24 | 23.67 |
M 18 | 29.56 | 15.8 | 15.1 | 27 | 26.16 |
M 20 | 32.95 | 18 | 16.9 | 30 | 29.16 |
M 22 | 37.29 | 19.4 | 18.1 | 34 | 33 |
M 24 | 39.55 | 21.5 | 20.2 | 36 | 35 |
M 27 | 45.2 | 23.8 | 22.5 | 41 | 40 |
M 30 | 50.85 | 26.6 | 24.3 | 46 | 45 |
M 33 | 55.37 | 28.7 | 27.4 | 50 | 49 |
M 36 | 60.79 | 31 | 29.4 | 55 | 53.8 |
M 39 | 66.44 | 33.4 | 31.8 | 60 | 58.8 |
M 42 | 71.3 | 34 | 32.4 | 65 | 63.1 |
M 45 | 76.95 | 36 | 34.4 | 70 | 68.1 |
M 48 | 82.6 | 38 | 39.4 | 75 | 73.1 |
M 52 | 88.25 | 42 | 40.4 | 80 | 78.1 |
M 56 | 93.56 | 45 | 43.4 | 85 | 82.8 |
M 60 | 99.21 | 48 | 46.4 | 90 | 87.8 |
M 64 | 104.86 | 51 | 49.1 | 95 | 92.8 |
M 68 | 110.51 | 54 | 52.1 | 100 | 97.8 |
M 72 x 6 | 116.16 | 58 | 56.1 | 105 | 102.8 |
M 76 x 6 | 121.81 | 61 | 59.1 | 110 | 107.8 |
M 80 x 6 | 127.46 | 64 | 62.1 | 115 | 112.8 |
Hex Nuts Grade Identification Marking | Hex Nuts Specification | Nominal Size ub Inches | Hex Nuts Proof Load Stress ksi | Hardness Rockwell | |
Min | Max | ||||
ASTM A194 – Grade 1 | 1/4 thru 4 | 130 | B70 | – | |
ASTM A194 – Grade 2 | 1/4 thru 4 | 150 | 159 | 352 | |
ASTM A194 – Grade 2H | 1/4 thru 4 | 175 | C24 | C38 | |
ASTM A194 – Grade 2HM | 1/4 thru 4 | 150 | 159 | 237 | |
ASTM A194 – Grade 4 | 1/4 thru 4 | 175 | C24 | C38 | |
ASTM A194 – Grade 7 | 1/4 thru 4 | 175 | C24 | C38 | |
ASTM A194 – Grade 7M | 1/4 thru 4 | 150 | 159 | 237 |
Size | Hex Finished Nut | Heavy Hex Nut | Square Nut | Hex Finished Jam Nut |
---|---|---|---|---|
¼” | 0.007 | 0.013 | ||
3/8” | 0.029 | 0.031 | 0.040 | |
½” | 0.038 | 0.065 | 0.057 | 0.027 |
5/8” | 0.073 | 0.119 | 0.049 | 0.108 |
¾” | 0.119 | 0.193 | 0.077 | 0.154 |
7/8” | 0.190 | 0.297 | 0.120 | 0.245 |
1” | 0.283 | 0.425 | 0.177 | 0.363 |
1 1/8” | 0.403 | 0.592 | 0.247 | 0.525 |
1 ¼” | 0.543 | 0.786 | 0.361 | 0.706 |
1 3/8” | 0.730 | 1.020 | 0.479 | 0.945 |
1 ½” | 0.943 | 1.310 | 0.609 | 1.220 |
1 5/8” | 1.620 | 0.916 | ||
1 ¾” | 1.510 | 2.040 | 1.000 | |
1 7/8” | 2.410 | 1.340 | ||
2” | 2.240 | 2.990 | 1.400 | |
2 1/8” | 3.350 | |||
2 ¼” | 4.200 | |||
2 ½” | 5.640 | |||
2 ¾” | 7.390 | |||
3” | 9.500 | |||
3 ¼” | 11.940 | |||
3 ½” | 15.260 | |||
3 ¾” | 18.120 | |||
4” | 21.830 |
Grade | C | Mn | Si | P | S | Cr | Ni | Mo | N | Fe |
Super Duplex S32750 | 0.030 max. | 2.00 max. | 1.00 max. | 0.030 max. | 0.020 max. | 22.0 – 23.0 | 4.50 – 6.50 | 3.0 – 3.5 | 0.14 – 0.20 | 63.72 min. |
Density | Melting Range | Yield Stress (0.2%Offset) | Tensile Strength | Elongation |
7.8 g/cm3 | 1350 °C (2460 °F) | Psi – 80000 , MPa – 550 | Psi – 116000 , MPa – 800 | 15 % |
C | N | P | Si | Mn | Mo | Ni | Cr | S | Other |
0.030 | 0.24/0.32 | 0.035 | 0.80 | 1.20 | 3.0/5.0 | 6.00/8.00 | 24.0/26.0 | 0.020 | Cu:0.50 |
We are One Of The Most Trusted Supplier Of S32750 Super Duplex Steel Hex Nut in India. For final SDSS S32750 Heavy Hex Nut Price List
Please Call on +91 80809 86211 or drop an E-Mail : [email protected]
MIDDLE EAST
| AFRICA
| EUROPE
| ASIA
|
Bengaluru | Mumbai | Chennai | Hyderabad | Kolkata | Pune |
New Delhi | Ahmedabad | Jaipur | Surat | Salem | Gandhinagar |
Bhiwandi | Tiruppur | Sivakasi | Jamnagar | Thiruvananthapuram | Rajahmundry |
Bhubaneswar | Vijaywada | Firozabad | Bokaro Steel City | Rajkot | Bharuch |
Panna | Raipur | Cochin | Ludhiana | Panipat | Durgapur |
Peenya | Pimpri-Chinchwad | Channapatna | Kharagpur | Nashik | Bareilly |
Varanasi | Haldia | Rourkela | Bangalore | Moradabad | Indore |
Visakhapatnam | Trivandrum | Pithampur | Dibrugarh | Angul | Gwalior |
Coimbatore | Kannur | Nagpur | Vadodara | Rudrapur | Noida |
Agra | Bhagalpur | Jamshedpur | Bhilai | Lucknow | kanpur |
Thane | Bhopal | Navi Mumbai | Vasai | Bikaner | Maharashtra |
©2022 All Rights Reserved. With ❤ by Hex Forge Inc. Design & SEO by Rath Infotech